Acrylic resin production line equipment:

The resin production equipment is a combination of a reaction kettle and ancillary equipment selected according to the process requirements, and can provide the user with an alkyd resin, a polyester resin, an unsaturated polyester resin, an epoxy resin, an acrylic resin, an amino resin, and a curing agent. Turnkey projects such as engineering equipment, equipment selection guidance, equipment processing, equipment installation, etc.

First, the introduction of acrylic resin:

    Acrylic resin is also known as acrylate adhesive, and polyacrylate is a one-component or main component adhesive. Both thermoplastic and thermoset.

Second, the production process of acrylic resin production line adhesive:

    1) Add raw materials and emulsifiers to the emulsification tank for emulsification to obtain raw material monomers.

    2) The fully emulsified monomer and initiator are added to the jacketed reaction vessel, stirred and heated in a water bath to allow thorough mixing.

    3) When the temperature is raised to 80 ° C, the initiator is added, and acrylic acid and other mixed liquid are added dropwise from the dropping funnel, and the addition is completed within 2 hours.

    4) The temperature is controlled at 85 °C ± 2 °C, and then kept warm.

    5) Add the additive and continue stirring at 75 ° C for 1 hour.

    6) Cooling and discharging. A milky white viscous liquid is obtained.

    (Add distilled water and emulsifier to the four-necked flask equipped with a stirrer, thermometer, reflux condenser and feeding device, stir and heat in a water bath. When the temperature is raised to 80 ° C, add the initiator and add dropwise from the dropping funnel. A mixture of acrylic acid, butyl acrylate, styrene and vinyl acetate is added dropwise within 2 hours. The temperature is controlled at 85 ° C ± 2 ° C, and then kept warm. 1 h, adding tackifier and crosslinker, at 75 Stirring was continued for 1 h at ° C, then the temperature was lowered and discharged. The appearance of the product was milky white viscous liquid.)

Reactor selection reference table:



Specification (L)


design pressure

Atmospheric pressure or pressure


Carbon steel, stainless steel, enamel, graphite

heating method

Jacket heat carrier electric heating, outer half tube steam heating, outer half tube heat transfer oil heating, hot water heating, infrared heating

cooling method

Jacket or inner coil refrigerant cooling

Stirring power

According to the material viscosity, liquid-solid ratio, liquid specific gravity, solid specific gravity, solid particle size, rotation speed, blade form, presence or absence of fixed baffle or inner coil, etc.

Stirring blade form

Anchor, frame, flat pulp, oblique pulp, ribbon, turbine, propulsion, or multiple forms

Shaft seal

Mechanical seal or packing seal

Internal surface treatment

Polished and not polished

Discharge valve

Flanged ball valves, upper and lower spread valves or other valves

Process nozzle opening

Manhole, sight glass, distillation port, material inlet, pressure gauge port, temperature measuring port, filling N2 port, discharging port, heat carrier inlet, coolant inlet and outlet, temperature measuring port, sampling port, emptying port, above Process requirements increase or decrease

  • Electric heating reactor
  • Outer coil reactor
  • Outer coil reactor
  • Multi-functional reaction kettle
  • High speed dispersion kettle
  • Low speed agitator
  • Glass-lined reactor



Vacuum Emulsify Machine

Custom Reactor

Dispersion Machine

Sanding Machine

Mixing Machine

Filling Machine

Cream emulsion machine

Stainless steel storage tank

Water treatment machine

Primary fermentation equipment

Automatic production system

Cosmetics production equipment

Cream production equipment

Liquid production equipment

perfume production equipment

Lipstick production equipment

Fog tank production line equipment

Powder production line equipment

Toothpaste production line equipment

Soap production line equipment

Chemical production equipment

Alkyd resin production line equipment

Acrylic resin production line equipment

PU polyurethane production line equipment

Epoxy resin production line equipment

Polyol production line equipment

Silicone oil production line equipment

Hot melt adhesive production line equipment

Modified rosin resin production line equipment

Adhesive production line equipment

Water reducing agent production line equipment

LED raw material mixing production line equipment

Water based acrylic acid production line equipment

Water based PU resin production line equipment

Paint production equipment

Oil paint production line equipment

Ink production line equipment

New Energy materials production equipment

Lubricating oil production line equipment

Vehicle fuel tank production line equipment

Food additive production equipment

Pharmaceutical equipment

Ointment production line equipment

Syrup production line equipment

Injection and potion production line equipment

Internet application

Contact Us

Headquarters Add: Tian An HI-tech Ecological Park, Panyu Dist., Guangzhou City, China
Factory Add:NO.3, Kangtai Street, Zhaoqing National High-tech Zone(Dawang),Guangdong Province
Tel: 86-758-3623881

  • Official WeChat
  • official Weibo