The fully automatic semi-fluid packaging machine of Guangzhou Jinzong adopts computer program control completely, and the production process can be completed automatically, such as: bag making, measurement, filling, sealing, printing batch number, production date, plus easy tearing, cutting or joining bag, counting, etc.. The whole process. The machine adopts 304 stainless steel plunger pump to greatly reduce the filling error, so that the filling measurement is accurate, and it is more suitable for filling and packing of various sauces. Stainless steel material is used for the shell and material contact. You can choose back seal, three side seal, four side seal packaging form. This series filling machine is a semi-automatic piston filling machine. A piston is driven by the cylinder to draw and hit the material, the flow of the material is controlled by a one-way valve, and the flow of the cylinder is controlled by a utility switch. The filling amount can be adjusted. Stainless steel material is used for the shell and material contact.
1. This machine uses both Chinese and English liquid crystal display, operation instructions at a glance. The operation interface of the menu is extremely simple and convenient;
2. Adopt PLC centralized control system, intelligent photoelectric positioning, strong anti-interference;
3. With accurate positioning function, with color standard packaging material production;
4. Intelligent fault diagnosis and automatic display of error positions in Chinese(eg, photoelectric errors, trip errors, etc.);
5. The intelligent thermostat controls the temperature of the horizontal and vertical sealing molds in two ways, and the double rotating arm seals, and the thermal combination effect is better;
6. The newly designed integrated electric cutter, which can be cut off by N bags, can avoid the phenomenon of card bags, and the cutter is durable. It can adjust the position of the cutter when the machine is running, thus facilitating the user's operation.
1. Turn on the power switch of the packaging machine;
2. Open the pressure strips of the packaging bags and place the packaging bags loaded into the packaging machine's workshop. The seals must be placed flat on the silicone rubber strips. The bags must not overlap. Turn the pressure strips of the packaging bags to press the mouth of the packaging bags.;
3. (or press the edge of the upper cover) press down on the studio and close the cover. The machine will automatically complete the packaging process and automatically open the cover according to the program. Some equipment is equipped with an emergency stop switch;
4. Open the cover, remove the bag, and complete a work cycle
5. When the packaging machine stops working, turn off the power switch and pull out the power plug.