产品中心

Automatic Bottle Drying Sterilizer

Automatic Bottle Drying Sterilizer
  • 产品介绍
  • 售后服务

Introduction:
This series of products are all axial flow fans, equipped with an automatic constant temperature control system, and computer control systems for choice. Its working principle is to use steam or electrical heat source to heat the air through heat exchangers, and to use axial flow fans as power, so that the moisture content of hot materials is reduced and the purpose of drying is achieved.

Features:
1, the appearance is beautiful and novel, using all stainless steel production;
2, the entire baking process for continuous uninterrupted work;
3, occupy a small area, save drying time, can be used with baking;
4, the transmission of the dryer for frequency conversion speed adjustment, according to different bottle type arbitrary adjustment drying speed, drying temperature can be arbitrarily adjusted between 0-3000C, to ensure that the original bottle hot, hot silver effect.
5, ultraviolet sterilization, to ensure that the glass bottle dry without living bacteria, extend the shelf life of the product;
6, the internal drying use of stainless steel wind heating rod to ensure its service life.
7, baking bottle speed 50-200 / minute;
8, both have thermal work equivalent contraction function, can be used more than one machine.

Principle:
The hot air circulation oven air circulation system adopts the fan circulation air supply method, the wind circulation is uniform and efficient. The wind source is driven by a circular wind feed motor(using a non-contact switch) to drive the wind wheel through the heater, send the hot wind out, send it through the wind channel to the oven room, and then inhale the air into the air channel to become the wind source for recycling. Heating use. Ensure indoor temperature uniformity. When the temperature value swings due to the opening and closing action, the air supply circulation system quickly returns to the operating state until the set temperature value is reached.

型号

CT-1

CT-2

每次干燥量kg

120

240

配用功率kw

0.45

0.45

耗用蒸汽kg/h

25

50

散热面积m³

20

40

风量m³/h

1400

5200

上下温差℃

±2

±2

配用烘盘 (只)

48

96

外形尺寸mm

2430*1200*2375

2430*2200*2433

配套烘车

2

4

上一页
下一页

联系我们


全国服务热线
86-20-39900130

总部地址: 广州市番禺区东环街番禺大道北555号天安总部中心1号楼1505室
工厂地址:广东省肇庆国家高新区(大旺)康泰街3号
电话:86-758-3623881
  • 官方微信
  • 官方微博
咨询反馈
扫码关注

微信公众号

返回顶部